To begin with, it is necessary to clear up a conceptual ambiguity and clarify what the difference is between roof tiles and roofing tiles: While tiles are made of classic clay and fired, roof tiles are made of concrete with purified quartz sand. The mixture is mixed with color pigments and then pressed into the desired shape. Because of this method of production, roof tiles are also commonly referred to as roofing stones.
Although a roof tile is still the most popular building material for roofing in USA, the roof tiles can convince with good arguments. Namely, unlike the tiles, they are particularly soundproof, because the concrete has a greater density than clay. In addition, the tiles are characterized by the fact that they gain hardness over time, which makes them extremely durable and contributes to good weather resistance. It is also necessary to install snow guards for corrugated metal roofs.
Contents
OUR TIP:
Although you can sometimes find instructions on the Internet on how to install roof tiles on your own, it must be clearly discouraged! The roof surface is an extremely sensitive part of the house, and expert knowledge is an indispensable prerequisite when working on it!
The complex work process begins a few steps before the installation of the tiles. Proper waterproofing of the house with vapor retarders, the legally required processing of insulation materials and the installation of roof battens and counter battens on the roof require expert execution. Finally, the roof tiles must be laid in such a way that moisture penetration can be excluded! Special care is required at corners and terminations, such as the roof ridge, chimney and skylights. These terminations are particularly susceptible to damage from moisture!
In addition, there is another aspect that requires the greatest attention. This is the storm protection of the tiles, which has been a legal requirement throughout Europe since 2005 in accordance with DIN EN 14437 and requires special measures. In principle, of course, heavier pans offer greater stability in storms – but even these cannot do without a special protective clamp in the long term.
OUR TIP:
Ask the roofing company about the possibilities and requirements for protective clamping. It is not possible to provide standardized information on this, as various factors must be taken into account.
Accordingly, the stapling must take into account
The expert has various clamping methods at his disposal, which are applied depending on the type of roof tile and the calculated wind load.
It is recommended by experts to have a roof cleaning performed every 5 to 8 years! This is important because over a period of time mosses, fungi and other weather-related deposits form on the roof and these attack the protective layer of the roof tiles. In this way, water can penetrate the tiles and make them brittle and fragile. The long-term consequences in this case would be that cracks and holes would appear during frost and the roof would leak in its entirety. You can wash the roof with a petrol pressure washer.
OUR TIP:
There are various chemicals available on the market for cleaning roofs, which may not be equally suitable for every type of roof. Therefore, not least for safety reasons, it is recommended to have this work done by a roofer. Keep in mind: This person not only has the know-how in dealing with the correct cleaning of the roof surface, but also has the necessary equipment, such as powerful high-pressure cleaners. On our portal, you can get free, no-obligation quotes from proven experts in your region.
If, unfortunately and despite professional roofing and care, cracked or brittle roof tiles have occurred, they can of course be subsequently sealed or replaced by a specialist.
In the first case, a permanently elastic and fiber-reinforced sealant can be used, which is applied to the tiles with a brush. To carry out this operation, it is essential to thoroughly clean the pans in question, so that the compound can quickly soak into cracks and holes and dry out. However, a permanent solution is certainly to replace defective tiles. A roofer can replace roofing tiles damaged by storms or hail fairly quickly with a few simple steps.
OUR TIP:
Caulking the tiles is a good idea when you need to do it quickly! However, for long-term roof protection, it is recommended that leaks be repaired with new roofing tiles. Make this decision after consulting with a handyman who has assessed the extent of the damage on site!
If you want to provide additional protection to your roof tiles, waterproofing can definitely help. This may have been done prior to roofing – numerous manufacturers offer this as an additional service. However, it is also possible to paint the tiles with coating color afterwards: thorough cleaning and the application of a special primer are the first prerequisites for this. Furthermore, it is important to note that the pans must be impregnated without gaps and evenly, so that comprehensive protection can be guaranteed.
CAUTION:
You should only use paint and primer from the company that manufactured the original pans. Only in this way you can achieve a guaranteed color match!
Finally, it is necessary to clarify what costs you need to calculate for the roof tiles. Of course, the different dimensions vary, in addition, the shape, composition and color are also very different.
Therefore, the price range must be somewhat broader: As a rule, the cost ranges from 45 cents for ordinary to 2 euros for special, for example, coated, tiles. These figures refer to retail purchases – the roofer can sometimes obtain lower prices due to larger order quantities and special conditions. Therefore, be sure to inquire about prices with your craftsman!
Among the best-known manufacturers of roofing tiles are:
This compilation should be understood only as a small excerpt from the extensive assortment of the manufacturers mentioned, each of which covers the price range mentioned.
Depending on the shape of the roof, there are different amounts of offcuts (such as on gables, windows, edges), which must be included in the total amount required. Also, the tiles represent only one component of the cost to be calculated: Often, other building materials such as roof battens must be included, and the above-mentioned protective clamps are also added. Finally, the costs for craftsmen must also be included!
Roof tiles differ from tiles in terms of material – they are made of concrete and purified quartz sand. Numerous manufacturers offer products in various shapes and colors. The costs incurred are equally diverse. Also note that in addition to laying the tiles, work such as waterproofing or installing roofing and counter-battening are essential for a long-lasting roof! For this reason, you should never dare to work on your house roof yourself, but always hire an experienced professional! For example, you can request quotations from roofing contractors in your region free of charge and without obligation using the practical online form at saferoofexperts.com
Adelaide, renowned for its lively festivals, historic architecture, and lush parklands, provides an enriching environment…
Introduction The Baby Girl Long-sleeve Thermal Jumpsuit from TheSparkShop.in is a top choice for parents…
Worldwide, millions of people go into sudden cardiac arrest each year. Studies show that their…
Within the realm of contemporary music merchandise, few groups have left a more profound impact than Ghost,…
Innovation is essential in the field of HVAC (Heating, Ventilation, and Air Conditioning) systems to…
Gcp Big Query: Powerful Data Analytics for Mass Storage and Analysis Ezwontech.com: Data is the…