How to Tie Spearguns and Polespears Bands

Do you plan to go spearfishing but lack the skill to assemble your tools? Look no further than the Spearguns and Polespears- Neptonics  use of spears to fish is an ancient practice; hence, it is not a new technique to modern fishers. 

However, with developing times, demand is high for more products. Most if not all the manufacturers in the industry are coming up with devices that are more sophisticated. These superior quality devices come in handy during immersed and sport fishing. With basic competency, this act is not hard.

Spearing different fish species from various sources like rivers and streams is now fun and easy. Hence, it is vital to secure both devices for a successful fishing adventure. For more on this exciting and straightforward assembly guide, keep reading!

Steps to Tie Speargun Bands

There are various designs to tie a speargun before luring your target. However, today, you shall learn about the standard style called the constrictor knot. It is essential to do it yourself and use a fast, easy, and fun procedure. This concept is ideal for saving on time, energy, and money.

Let us jump in on this detailed process! However, first, you need to gather all the essential working materials.

1. Cut the rubber to the required length.

Place accord wishbone straight on the rubber while keeping in mind the band finish. Therefore, it is best to square-cut the ends for an easy stretch. However, you can also match the new with the old band to maintain the same length at the construction points.

To be on the safe angle, add a minimum diameter of the present rubber. For example, the old rubber is 20 inches, while the current one is a 5/8 inch gum. Cut the new rubber at least 20 5/8 inches to get the overall length. Grab a pair of anvil pruners for accuracy.

2. Mark each band side with ½ diameter where your knot will position. Use a silver sharpie for excellent markings on black rubber.

3. With the aim of a thin nose plier, some water, and soap, insert the wishbone deep inside the rubber. Push it past the markings for secure placement.

4. At the rubber end, tie a constrictor knot over the marked rubber.

Using two solid stainless pliers, tug the knot apart to tighten it. For protection, wear a hand glove on the hand holding the rubber. 

5. Bond together an overhand knot using two ends, cut off and use a lighter to melt. This method sticks the rubber together.

Overall, there you have it! If you are looking for high-quality spearfishing guns, the Spearguns and Polespears – Neptonics is your one-stop-shop. The Super Amero & Hatch Amero Speargun and Neritic Big Blue Polespear have the finest 100% Neptonics with 100% teak components. Besides that, the brand stores the premium Rob Allen & Riffe spearguns for your spearfishing needs.

With this fantastic guideline on how to tie spearguns and polespears bands, ensure your rig is successful.