How to Unlock DeWalt Miter Saw

Knowing how to lock and unlock a miter saw is critical in understanding how to operate the saw safely. I have been using a DeWalt miter saw for the past four years, and I can confidently say that it’s the most reliable tool for carpenters and DIYers.

I’m going to teach you easy ways on how to unlock a DeWalt miter saw. I’ll take you from the beginner level to a professional.

Step 1: Use the Knob to Unlock the Down Position Lock

Sometimes knowing where to start when unlocking a DeWalt miter saw is critical. But believe me, this is the first step of the whole process. Locate the handle behind the saw blade and follow it until you find the rail that intersects the base and the head of the saw. The rail looks like a thick metal and is easy to find.

This process is straightforward, but sometimes it might be challenging if you are using the old versions. For the recent models, open the knob, and deactivate the lock automatically. If you are using the old versions, the pin might be the knob. Turn it anticlockwise to pull it out and vice versa.

Ø  Most versions of miter saws use a DeWalt pin as a lock pin. You might apply this step in almost all miter saws.

Step 2: Angle Lock

In my early days of using a DeWalt miter saw, I had some challenges understanding the angle locks. You will find it at the miter saw front part. They are two locks that control the movement of the angle. However, the earlier versions of the saw only had one lock controlling the angle.

How do you unlock the angle lock?

This process is also straightforward, regardless of the brand or the mode of operation. Initially, I was using a miter saw with the level lock underneath the knob lock, and it was all right. But in the recent models, you’ll unlock the lock by uniting the dual locks. This process is critical to ensure the transmission of the mechanism is ongoing.

Step 3: Knurled Knob Lock

To understand how to unlock a miter saw, you need to be conversant with almost all the saw parts. I took up to one month trying to figure out the work of each component. Knurled knob lock is one of the elements of a saw you will enjoy learning. Since the blade swivels from side to side, you can alter the movement by turning the knurled knob either clockwise or anticlockwise.

How do you lock the miter saw?

As I said earlier, knowing how to unlock a miter saw is as critical as knowing how to lock it. Your miter saw opens when you loosen the knob. So, locking it is the opposite. You shut the saw when you tighten the knob.

Ø  This method applies to almost all the miter saw, regardless of the brand.

Step 4: Pre – Set Angle lock

This lock is a bit special, and you’ll find it in almost all the miter saws, including the DeWalt. The safety needs you the already spring-loaded lever. That means you’ll have to press the present angle with your index finger or otherwise the middle finger.

It is interesting to operate the bingo! The lever is one of my favorite parts of a DeWalt miter saw since it is easy and effortless to unlock.

Step 5: Swivel and Lock

As you have already seen, we are following a chronological order in unlocking the DeWalt miter saw. You cannot unlock the pre-set angle unless you play around with the swivel and lock. Unlocking the swivel is very effortless. You’ll only need to spin the handle and make sure you perform this process before activating the lever.

To activate the lever, push it down to pre-set the custom angle. You’ll hear a clicking sound indicating that you have set the angle. The next thing to do is securing the angle by the use of the knurled knob.

Step 6: Unlocking the Head and the Base

When unlocking the head of a DeWalt miter saw, you have to insert pressure on the lever or the pin. In most miter saws, you’ll find these parts behind the blade. Just pull the pinout to insert some pressure, and there you go. You have unlocked the head!

Unlocking the Base

You don’t have to place down some pressure to unlock the base. Check on the DeWalt saw miter stand, and you will find a knob. Use the knob to move the base. The knob helps you get the right angle by the use of the pre-set angle positions.

Step 7: Unlocking the Slider

The lock is available in most sliding DeWalt compound saws. Turn the knob in an anticlockwise position. This will release the slider and help your arms slide in and out. Once you acquire the desired placement, put the knob back in its normal position.

Which is the Best Sliding Compound Miter Saw?

DWS779 DeWalt sliding miter saw is by far the most formidable and accurate miter saw for your daily tasks. The saw has a powerful motor for extended power and comes with a cam lock miter handle. I advise you to make this saw your first pick, and you will not regret the journey.

Final Words

DeWalt Miter Sawmotor to quickly follow up the above steps. If you are having some trouble unlocking the miter saw, perform some troubleshot measures. That’s all you need to know about DeWalt miter saws, and I hope the guide was beneficial.