Construction work is considered one of the riskiest and most tiring jobs ever. Sure, the usage of advanced machinery made the job a lot easier, but handling these monster machines is not easy. So here in this article, you will get to know about some safety tips and brief knowledge about the hazards of mishandling a threading machine.
Contents
Threading Machine Safety Tips
Clothing is a fundamental issue while working in sites and surrounded by heavy machines. So wearing loose clothes and ill-fitting gloves are an absolute no for the threading machine users. Always try not to keep an open end of cloth cause it can get stuck into some machine to cause serious injury. Such events usually cause organ mutilation even. Eye protection gear and face shield are also essential. Especially while using a pipe threading machine, these gears are a must because the cut edges are very sharp and can hurt dangerously. Construction works require long term experience, But don’t trust your knowledge always. The technologies are ever-changing. So, keep yourself updated about the machine properties and read the user manual before operating. Follow the instructions accordingly, and understand the control mechanisms very well. In case you don’t understand something, then stop the automated mode abruptly. Switch to manual and take care of the matter. It’s always better to rely on renowned brands like Ridgid. If you or any team member gets some injury, immediately report it to the command and apply for medical attention. These injuries can be very crucial to infection and deadly. So, it’s never wise to overlook the cuts and infection from any machine cut.
After using the machine, always clean off the oil or cover it up with some absorbent material or sand. It’ll prevent the ground from slippery and the chance of fracture and accidents. Before using any machine, make sure you insure them and keep the papers updated. Not only for the devices, taking a health insurance policy for all the workers is the best one can manage on Greenlee Mexico.
Dont’s Of Threading Machines
Don’t mix up the cleaning fluid with machine oil and such. Mostly these chemicals are highly flammable and dangerous to use. It’s best to keep the machine steady after cleaning it. In case you are using an oxidizing or riding cutting fluid, it’s better to switch to another. Besides, bacteria or algae can be born in this fluid.
Machine Maintenance Tips
Make sure the machine is set up on a level. Always maintain a repairing tool kit for regular repair and fixation. Always use a spatula to clear out the pipe cutting from the head die to prevent the cut injuries. Check the chasers before starting the machine every day. It’s harmful to the device to run it on a broken or damaged chaser. It’s essential to check the engine oils every month. Change the fuel if it’s not machine efficient or eco-friendly. The electrical wiring is susceptible in the threading devices. Check the switchboard once in a month, if not weeks. If you find any spark or dysfunction, then immediately turn off all the factory or site activity. Otherwise, it may cause severe accidents and injuries to the workers.
Conclusion
Machine safety is a must in the modern-day construction business. Besides, machines and logistics are also costly. So, if we maintain the user manual and take safety measures, it can reduce the workers’ yearly repairment costs and occupational hazards to a certain level. Never overusing a machine and wearing primary safety gear is the preliminary stage of safety protocol. Following the safety protocol can save a lot of Distribuidor Ridgid cost.
