Rust can be considered the most common type of corrosion. When iron is exposed to oxygen, a chemical reaction will occur and rust will be the end-product of this reaction. Removing rust stains from things like fabrics or bathtubs can be an intimidating and tedious task, but with the right materials and a little know-how you will surely be able to accomplish this in no time. Listed below are the materials and simple steps on how to remove rust stains and if you need help from professional then call carpet cleaning Brisbane.
Things You Will Need
3. baking soda
6. water (cold and warm)
8. brush with soft bristles
Removing Rust Stains on Fabrics
To remove rust stains from fabrics, extract the juice from your lemon and apply it to the affected portion. For best results, make sure that the stained part is saturated well. After saturating the fabric with lemon juice, apply salt on the stained area. Leave it for a couple of hours to allow the lemon juice and salt to penetrate the fabric and react with the rust. It is also advisable that you apply lemon juice several times to keep the stained area damp.
After waiting for several hours, launder the fabric if possible or at least rinse it well with cold water. If there are still visible stains after rinsing, repeat the procedure until all the stains are completely gone.
Removing Rust Stains on Bathtubs
You can also do the same lemon and salt method to remove rust stains from the surface of porcelain bathtubs, but if your bathtub is made of a synthetic material mix lemon with baking soda and put it on. All you have to do is get a wet sponge, put the mixture of baking soda and lemon juice on the sponge, and apply it on the stained parts of the bathtub. Make sure that all of the stains are completely covered with the mixture.
Allow it to rest for several minutes before gently scrubbing the stains to ensure that the rust will be easier to remove. After scrubbing, rinse it well and if the stains still persist, repeat this simple method.
Alternative Ways to Remove Rust Stains
One alternative technique to remove rust stains is to make a slurry made up of borax and lemon juice. Prepare this by simply combining a small amount of borax and lemon juice until you achieve a paste-like consistency. Use a brush with soft bristles to spread the mixture on the stained area and gently scrub the stains away. After scrubbing, rinse well and repeat the procedure if necessary.
If the rust stains are too stubborn and all of the previous methods did not yield positive results, try diluting 2 tablespoons of ammonia with 1 liter of warm water and apply it on the affected area with a clean piece of cloth. You can leave it for a few minutes and rinse it well with cold water afterwards.
Rust stains can be the most annoying type of stain and one of the most difficult to deal with, however, rust stains should not be a cause of worry or hassle to anyone. Just by following these simple methods, you will be able to clean rust stains with less effort and time. Lastly, the advantage of these effective strategies is that they require materials that are readily available in your homes or can be easily purchased.
1. Chlorine bleach may be an effective whitener, but you should know that using this will NOT remove rust stains. this will definitely make the condition bad. So remember, never use chlorine bleach to remove this type of stain and also easily remove pet stains from carpet.
2. Do not rub the stain on a fabric. Not only will it intensify the discoloration, it might also cause damage to the material.
3. There are cleaning products available in the market to remove rust stains. Just make sure that you read the package and follow the instructions accurately.
Oracle best carpet cleaning Brisbane specializes in expert stain removal and green best carpet cleaning Brisbane.
With over 20 years of experience and continuous training, they’re confident that, “If they can’t remove a stain,
no one else can!”
Oracle carpet cleaning Brisbane