What Is The Best Way To Paint A Kitchen Drawer?

Your kitchen space will be invigorated with newly painted drawers and 16 inch drawer slides. In addition, it shows you legitimate methods for applying paint to drawers. In this article, you’ll learn how to paint kitchen drawers, what tools you’ll need, and step-by-step directions.

Screws must be taken out.

First, you need to take out every drawer! First, remove every pivot from the drawer slides and pulls/handles on the 16-inch drawer. Next, remove the two screws affixed to each pivot and the one screw that connects the pivot to your drawer outline.

Remove the drawer faces.

You can now get rid of all of your drawers and drawer faces! While the drawer pieces are on the divider, you can’t paint them all at once. Each of these pieces must be painted separately. Some drawer faces within drawer boxes have bad conditions. You may need to take out the veneers and unscrew the drawer using 16 inch drawer slides.

Make sure the drawer surfaces are clean.

A kitchen drawer surface becomes oily and grimy due to cooking, hand oils, and other things in the kitchen. Paint and primer will not adhere to an oily drawer. You can remove oil directly from your skin with trisodium phosphate. The bundling can be examined, diluted with warm water, and wiped with a sponge to eliminate drawer cleaning. With warm water, wipe the surface after cleaning. You should repeat this every time you wish to paint a drawer. Before painting any surface, make sure it is thoroughly cleaned—tape paper to the floor, ledges, and different assets where your work area is.

Sand the drawer surface

The smooth surfaces of your drawers will stick well to the groundwork after sanding. Make sure you sand your drawers level using your #120 sandpaper and sanding block. Use a small piece of sandpaper for the corners and adjusted areas. The surfaces must be vacuumed and wiped down with a tack material (normally tacky) after the sanding process is complete to remove any residue particles.

Prime the drawer fronts

Drawer fronts should be laid out on a raised, not a level, surface. This will prevent drawers from sticking to the covering. Prepare first! Prepare and prime work as one. However, make sure you put some extra energy into working your pre-work into the drawers. You should use long, even brushstrokes when painting.

Don’t forget to prime the drawers.

You can’t rip off the 16 inch drawer slides, so you need to work with where they are. To hide the connection between the drawer surface and kitchen divider, use painter’s tape. Painting tape should be applied where the divider, floor, roof, or drawers meet.

Try crushing the painter’s brush in the middle of the opening where your drawers are. This will help keep paint from staining your divider. Set up your drawer’s interior, avoiding painting the inside. Your brush should be tight now. Paint or groundwork your drawers, then place your brush where the ‘cut in’ is on the highest point. Take it down through and through the divider. Make sure you go through each drawer.

Don’t forget to paint twice!

As soon as all surfaces have been prepared, it is time to start painting! Preliminaries must be dry before use. Then, all surfaces prepared for painting should be painted. A subsequent coat of paint can be applied after four hours have passed. Using your dismantled drawers, repeat the process. Reinstall your drawers and entryways after the paint has dried.