If your air conditioner isn’t cooling your room or lounge, you need to know what might be the reasons. There are many components of your air conditioner that might cause this problem. You need to check all of these components to make sure you get to the root cause of the problem and get it repaired from a reputed HVAC Contractor Edmonton. Let’s have a look at what might cause your air conditioner to stop blowing cool air.
Air filter might be blocked or damaged
The first thing you need to check is the air filter of your air conditioner. If there is too much dust stuck in the air filter, it results in low or no cooling. It’s something that you can mostly do yourself. You can take out the air filter and wash it with water. It’ll enhance the cooling capacity of the air conditioner. You just don’t have to worry too much if your air conditioner isn’t blowing cool air. This is the first layer of inspection and solution to the cooling problem.
Faulty fan motor or slow fan
There is a chance that the fan or the fan motor is not working properly. If the fan is running too slow or isn’t running at all, there will be less or no cooling. When the fan is running properly, it blows enough air over the evaporator coils and then blows it back into the room. If the fan isn’t moving properly, there will be less or no air blowing over the coils and consequently, there will be no cooling. This is a problem that you need to call your HVAC contractor for. It’s always wise not to try it yourself even if you think you are capable of doing it.
The thermostat might not be working
The next component to check is the thermostat or the temperature control of your air conditioner. There can be two things wrong with the temperature control of your air conditioner. First, you may have set the temperature too high in accordance with the high temperature outside. In this case, you just need to adjust the temperature according to the recent increase in the temperature outside.
Secondly, the temperature might have a fault and may not be showing the correct temperature at which it is actually working. It might show your desired temperature but not actually be in a working condition. The expert HVAC staff must be hired to see what’s wrong with it and decide whether to replace it or repair the old one.
Control board might have malfunctioned
If you have checked every component we have discussed above, the next thing that might not be working properly is the control board of your air conditioner. You need to check the control board and see what’s wrong with it. This control board actually does the monitoring of the air’s temperature that comes in. On the basis of this temperature, it either turns the compressor on or keeps it off.
Check the capacitor
The capacitor of your air conditioner can also be a source of low or no cooling. You need to get it checked from the HVAC company so that the problem is solved in a professional and proper manner. If the capacitor of your air conditioner is damaged, the compressor will not start and therefore there will be no cooling coming from the air conditioner.
You need to call your nearest HVAC company or the company that installed your HVAC system if you face any problem in your air conditioner. You need to know what might have caused this problem in your air conditioner so that you know what the HVAC experts are doing or need to do to fix the problem of your air conditioner.