The explanation about dry riser and wet riser system!

Making a building is harder than it seems. Suppose you’re thinking of making a new building. Now you have to hire an engineer for creating a unique design for your home. You need to buy all the products and ingredients that are important for the building. But the most important fact, what about the security of your house? You have to think about proper security and protection. There are many options to make safe the building. Dry and wet riser system is among those. It would be best if you went through the dry and building wet riser installation process. (You also can check the link for detail.) Now let’s know about the whole system.

Dry risers

Using dry risers is not like an option. If a building is taller than 18 meters, this system is a legal requirement for the house. Its pipe networks make a connection to the ground floor. It would help if you also connected with the multiple internal outlets located through the higher floors. It is dry riser because it typically remains dry. But when an emergency comes, water goes across the pipe and the network. It enables the firefighters to connect their equipment to the nearest outlet for an instant path of water.

You should set outlets within every 900 square meters of the floor. But typically you need to place in the lobbies, cupboards and stairways. It would be best if you put an outlet in every building floor. Dry riser system has some limitation too. If your wet riser system can require 50 meters, then your dry riser can provide the best water pumping service within the specific 50 meters. So you can see, the wet riser is also crucial for a dry riser system.

Wet risers

The wet riser is very similar to the dry riser system. The wet riser will be a legal requirement for all those buildings that are longer than 50 meters. The system can provide better water pressure on the higher floors of a building. It also creates a pipe network all over the building. And it is essential to keep a full prescreened supply always. Wet risers have to be in the structure of a storage tank. The outlet system remains similar to a dry riser.

When an emergency or fire breaks out on the upper level of the building, you definitely should call firefighters for it. The firefighters need rapid access to pressurized water. This water system is more important rather than simple pumped water through the system. For the best work, your wet risers provide a minimum of 1500 litres water per minute. So you can see, wet riser need to set if you install a dry riser in your building.

The relation between dry risers and wet risers

If you’re being confused about dry and wet risers, don’ be worried! The two systems are not different and have a lot of similarities. Even you can say that these two systems are the complement of each other. For example, both of the riser systems are ultimately important necessary for fixing a pipe network for higher buildings. This whole system is for protecting the house from fires.

Conclusion

So here is the full explanation about dry and wet risers. I hope now you know what dry and wet building riser are. How do you use and why they are essential for your building. Look smaller house doesn’t require extra protection like a large building structure. If you have a taller place, you should need to take more protection for the safety issues. So when you are making your house, you also should install dry and wet riser system at that. It will make your building protective and safer.