The functions of the metal fiber laser cutting machine parts are as follows:
Contents
1. Body:
The main part of the metal fiber laser cutting machine realizes the movement of X, Y and Z axis, including the cutting work platform. The working bed is used to load the working material according to the control program and move it accurately and correctly.
2. Laser source:
a device used to generate a laser beam source.
3. External light path:
The mirror is used to guide the laser beam to the right direction. In order to prevent the beam path from malfunctioning, all mirrors should be protected by protective notches to prevent the lens from being contaminated.
4. Control system:
Control the movement of X, Y, Z axis, and control the output of laser power at the same time.
5. Voltage stabilizer:
installed on the laser source, between the workbench and the mains of the power supply, to prevent interference from the external power supply network.
6. Cutting head:
It mainly includes the main body of the cutting head, focusing mirror, protective glasses, capacitive sensor auxiliary air nozzle and other parts. The cutting head drive device is used to drive a separate Z axis of the cutting head according to the program. Servo motors and transmission components make up the cutting head, such as ball screws or gears.
7. Cooler group:
used to cool the laser source and focusing lens, the mirror in the cutting head.
8. Gas storage tank:
mainly used to provide auxiliary gas for the cutting head.
9. Air compressor and container:
provide and maintain auxiliary gas for cutting.
10. Air cooling dryer, air filter:
used to provide clean and dry air to the laser generator and beam path to keep the path and reflector working properly.
11. Exhaust dust collector:
extract and filter the smoke and dust generated in the process to ensure that the exhaust gas discharge meets environmental protection standards.
Here are mainly the parts of the metal fiber laser cutting machine. When choosing a machine, you can consider this.