You may be oblivious to black mold developing in the dark corners of your home. Mold thrives in dim, humid, warm, and dingy environments, and getting rid of it after it has spread may be difficult.
Mold develops in favorable conditions, quite often in as little as one to two days. Allowing mold to grow unchecked may aggravate respiratory diseases and also seasonal allergies. Because of mold’s rapid growth and danger to the health of your beloved, always check and eliminate it.
The kitchen, basement, and washroom are typically wet areas; As such, they’re susceptible to mold and bacteria growth. A frequent, full service house cleaning – Valet Maids can help limit moistures and other factors that encourage mold growth.
Other ways of preventing mold include cleaning tile grouts, using a squeegee to dry wet shower doors, fixing leakages, and having your tile grout cleaned regularly. However, even with frequent sterilization and cleaning, molds may still find their way to your home.
What Are the Best Ways To Rid of Mold From Your Home?
Numerous commercial mold removal solutions are available today, but most of them are composed of hazardous chemicals equally as dangerous as mold. But there are several mold removal solutions, as listed below.
- Using Hydrogen Peroxide For Mold Removal
Hydrogen peroxide is an antibacterial, antiviral, and antifungal solution available in most medical cabinets at home. It is suitable for use across various home surfaces, household appliances, toilet seats, tubs, wall tilings, countertops, and bathtubs.
The procedure
- Fill a spraying container with a three percent concentration of hydrogen peroxide.
- Test the spray on an inconspicuous surface area to avoid discoloration or corrosion.
- For 10 minutes, soak the surface that has mold on it.
- Scrub mold off the surface with adequate force to eliminate any remaining mold streaks.
- Use a washcloth to dry the surface once it’s clear of any remaining mold or stains.
- Vinegar For Mold Removal
White vinegar is slightly acidic. Therefore, it’s effective for cleaning, deodorizing, or disinfecting. If used on porous and non-permeable areas, it can destroy 82 percent of existing mold species, such as black mold. Save for its unpleasant odor that dissipates fast; it’s gentle on most home surfaces.
Procedure
- Fill a spraying container with concentrated white vinegar (white vinegar has approximately 20 percent acetic acid, diluting it with water reduces its effectiveness).
- Spritz the area with vinegar and let it sit for 45 minutes.
- Lastly, rinse the surface clean with water and let it air dry. The vinegar odor should be gone in a day.
- Using Baking Soda To Get Rid Of Mold
Baking soda’s use at home is unlimited, from easing reflux, getting rid of smells in the fridge to removing mold. It is harmless to you, your household, or your pets. Not only does it wreck mold, but it also absorbs the humidity that feeds it.
Procedure
- Shake an aerosol bottle filled with water and a quarter tablespoon of baking soda to dissolve.
- Spritz the solution of baking soda and water on the area affected by mold.
- Using a scrubbing brush, scrape away the mold.
- Wash the surface with water to rinse away any remaining baking soda and dregs.
- Lastly, re-spray the spot and allow it to dry naturally, then destroy any remaining mold to deter it from coming back.
Note that some molds can be difficult to eradicate. For those types of mold, follow the procedure below.
- Combine two portions of baking soda with one part of water and one part of white vinegar.
- Mix the ingredients until they thicken into a paste.
- Allow the surface to dry after generously applying your mixture onto it.
- Remove the mold infestation and stains using a scrubber and a damp cloth.
Using Essential Oils To Remove Mold
Aromatherapy has become a common term thanks to essential oils. However, natural chemicals can provide us with more benefits. For instance, the tea tree naturally repels insects, is antibacterial, and is fragrant. At the same time, it’s a safe way to remove mold, as its antifungal characteristics kill mold spores and aids in preventing their recurrence.
Procedure
Combine one teaspoonful of tea tree oil with a single water cup.
- Shake firmly to combine the mixture.
- Spritz the area infected with the solution
- Let the surface dry for an hour.
- Using a microfiber towel or dry cloth, wipe the surface clean(Wear gloves that are protective to the hands because essential oils can be irritating to the skin)